Stale lock on cuaU0 PID=93137... overriding. Connected RedBoot> RedBoot> load keren  nel Using default protocol (TFTP) Entry point: 0x80091510, address range: 0x80050000-0x8047bf04 RedBoot> exec Now booting linux kernel: Base address 0x80050000 Entry 0x80091510 memsize=0x08000000 modetty0=0,n,8,1,hw board=RouterStation Pro ethaddr=00.15.6d.10.00.0c platform frequency: 720000000 arguments: a0 = 00000002 a1 = 80050028 a2 = 80050000 a3 = 0000000a Cmd line: ûÒà³ûyMqÕïûª±û{yçæÉ^¦¾­û•Q?ÿö2á¿÷Ì„íoD¹¦ä7uµo÷wþ«Ç¼ÛÅïÿë"Õ¼ŸÎžŸK>×ä×þî¾f Environment: memsize = 0x08000000 modetty0 = 0,n,8,1,hw ethaddr = 00.15.6d.10.00.0c board = RouterStation Pro Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v116.147 MMU: Standard TLB, 16 entries L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line Config1=0x9ee3519e Config3=0x20 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #43: Wed Oct 7 11:05:08 PDT 2009 gonzo@figaro.bluezbox.com:/src/FreeBSD/obj/mips/mips/src/FreeBSD/mips/sys/AR71XX mips real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00525000 - 0x07d68fff, 126107648 bytes (30788 pages) avail memory = 125300736 (119MB) wlan: <802.11 Link Layer> nfslock: pseudo-device mem: null: crypto: random: nexus0: clock0: on nexus0 clock0: [FILTER] apb0 at irq 4 on nexus0 apb0: [FILTER] uart0: <16550 or compatible> on apb0 uart0: [FILTER] uart0: fast interrupt uart0: console (115200,n,8,1) ehci0: at mem 0x1b000000-0x1bffffff irq 1 on nexus0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus0: set host controller mode usbus0: EHCI version 1.0 usbus0: set host controller mode usbus0: on ehci0 usb_needs_explore:1434: usb_needs_explore:1442: No root HUB pcib0 at irq 0 on nexus0 pcib0: [FILTER] pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x0700, dev=0x1107, revid=0x01 domain=0, bus=0, slot=0, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0356, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0, size 28, enabled map[14]: type I/O Port, range 32, base 0, size 8, port disabled pci0: at device 0.0 (no driver attached) arge0: at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: No PHY specified, using 4 miibus0: on arge0 ukphy0: PHY 4 on miibus0 ukphy0: OUI 0x001374, model 0x0004, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto arge0: bpf attached arge0: Ethernet address: 00:15:6d:10:00:0c arge0: [MPSAFE] arge0: [FILTER+ITHREAD] spi0: at mem 0x1f000000-0x1f00000f on nexus0 spibus0: on spi0 mx25l0: at cs 0 on spibus0 mx25l0: mx25ll128, sector 65536 bytes, 256 sectors ar71xx_wdog0: on nexus0 cryptosoft0: on nexus0 crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 Device configuration finished. Timecounter "MIPS32" frequency 360000000 Hz quality 800 Timecounters tick every 1.000 msec crypto: lo0: bpf attached GEOM: new disk flash/spi0 usbus0: 480Mbps High Speed USB v2.0 bootpc_init: wired to interface 'arge0' Implement me: SIOCDELMULTI Implement me: SIOCDELMULTI Implement me: SIOCDELMULTI Implement me: SIOCSIFFLAGS Implement me: SIOCDELMULTI Sending DHCP Discover packet from interface arge0 (00:15:6d:10:00:0c) arge0: link state changed to DOWN usb_bus_port_set_device:1421: bus 0xc0c81c50 devices[1] = 0xc0c93c00 ugen0.1: at usbus0 uhub0: on usbus0 uhub_attach:709: depth=0 selfpowered=1, parent=0, parent->selfpowered=0 uhub_attach:724: getting HUB descriptor uhub_attach:844: turn on port 1 power uhub_attach:844: turn on port 2 power usb_needs_explore:1434: uhub0: 2 ports with 2 removable, self powered usb_needs_explore:1434: usb_needs_explore:1434: usb_bus_powerd:1621: bus=0xc0c81c50 usb_bus_powerd:1704: Recomputing power masks uhub_explore:561: udev=0xc0c93c00 addr=1 uhub_read_port_status:280: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION uhub_reattach_port:301: reattaching port 1 uhub_read_port_status:280: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION uhub_read_port_status:280: port 2, wPortStatus=0x0501, wPortChange=0x0001, err=USB_ERR_NORMAL_COMPLETION uhub_reattach_port:301: reattaching port 2 uhub_read_port_status:280: port 2, wPortStatus=0x0501, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION uhub_reattach_port:349: Port 2 is in Host Mode usb_needs_explore:1434: uhub_read_port_status:280: port 2, wPortStatus=0x0503, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION usbd_transfer_power_ref:1574: Adding type 0 to power state usbd_transfer_power_ref:1587: needs power usb_needs_explore:1434: usb_needs_explore:1434: usb_needs_explore:1434: arge0: link state changed to UP DHCP/BOOTP timeout for server 255.255.255.255 Received DHCP Offer packet on arge0 from 0.0.0.0 (accepted) (no root path) usb_needs_explore:1434: Sending DHCP Request packet from interface arge0 (00:15:6d:10:00:0c) DHCP/BOOTP timeout for server 255.255.255.255 Received DHCP Ack packet on arge0 from 0.0.0.0 (accepted) (got root path) usb_needs_explore:1434: arge0 at 192.168.10.150 server 0.0.0.0 subnet mask 255.255.255.0 rootfs 192.168.10.1:/src/FreeBSD/tftproot/ Adjusted interface arge0 ifa_del_loopback_route: deletion failed Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 Root mount waiting for: usbus0 usb_needs_explore:1434: Root mount waiting for: usbus0