U-Boot SPL 2011.09-rc2 (Oct 06 2011 - 17:56:54) Texas Instruments OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Oct 09 2012 - 18:16:48) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 reading ubldr 728385 bytes read ## Starting application at 0x88000054 ... Consoles: U-Boot console Compatible API signature found @bfef4258 Number of U-Boot devices: 1 FreeBSD/armv6 U-Boot loader, Revision 1.2 (root@beastie.micom.mng.net, Mon Oct 8 16:40:54 ULAT 2012) DRAM: 1024MB Device: disk - /boot/kernel/kernel data=0x391738+0x1eab4 syms=[0x4+0x73330+0x4+0x5eb8d] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... fdt_start: 0x0056B7F8 fdt_reg_valid(): reg#0 (start: 0x80000000 size: 0x40000000) valid! Kernel entry at 0x80200100... initarm: console initialized arg1 kmdp = 0xc05acf00 boothowto = 0x00000000 dtbp = 0xc056b7f8 kernel image addresses: kernbase = 0xc0000000 _etext (sdata) = 0xc04e05f8 _edata = 0xc0591738 __bss_start = 0xc0591738 _end = 0xc05b01ec loader passed (static) kenv: no env, null ptr processing avail regions: 80000000-c0000000 -> 80000000-80200000 = 200000 80667000-c0000000 -> 80667000-c0000000 = 3f999000 fill in phys_avail: region: 0x80000000 - 0x80200000 (0x00200000) region: 0x80667000 - 0xc0000000 (0x3f999000) KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0 r241336M: Tue Oct 9 01:19:51 ULAT 2012 root@beastie.micom.mng.net:/usr/obj/arm.armv6/usr/src/sys/PANDABOARD-MMCSD arm CPU: Cortex A9-r2 rev 10 (Cortex-A core) Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext WB disabled EABT branch prediction enabled LoUU:2 LoC:1 LoUIS:2 Cache level 1: 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 4-way instruction cache Read-Alloc real memory = 1073741824 (1024 MB) avail memory = 1046220800 (997 MB) Texas Instruments OMAP4430 Processor, Revision ES2.3 random device not loaded; using insecure entropy simplebus0: on fdtbus0 gic0: mem 0xe8241000-0xe8241fff,0xe8240100-0xe82401ff on simplebus0 gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b nirqs 160 l2cache0: mem 0xe8242000-0xe8242fff on simplebus0 L2 Cache: 1024KB/32B 16 ways mp_tmr0: mem 0xe8240200-0xe82402ff,0xe8240600-0xe82406ff irq 27,29 on simplebus0 Timecounter "ARM MPCore Timecouter" frequency 504000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 504000000 Hz quality 1000 uart0: <16750 or compatible> mem 0xe8020000-0xe8020fff irq 106 on simplebus0 uart0: console (115384,n,8,1) ti_scm0: mem 0xd4e96000-0xd4e96fff on simplebus0 setting internal 4 for usbb1_ulpiphy_stp setting internal 10c for usbb1_ulpiphy_clk setting internal 10c for usbb1_ulpiphy_dir setting internal 10c for usbb1_ulpiphy_nxt setting internal 10c for usbb1_ulpiphy_dat0 setting internal 10c for usbb1_ulpiphy_dat1 setting internal 10c for usbb1_ulpiphy_dat2 setting internal 10c for usbb1_ulpiphy_dat3 setting internal 10c for usbb1_ulpiphy_dat4 setting internal 10c for usbb1_ulpiphy_dat5 setting internal 10c for usbb1_ulpiphy_dat6 setting internal 10c for usbb1_ulpiphy_dat7 omap4_prcm0: mem 0xd4e97000-0xd4e98fff,0xd4e99000-0xd4e99fff,0xd4e9a000-0xd4ea1fff on simplebus0 gpio0: mem 0xd4ea2000-0xd4ea2fff,0xe8055000-0xe8055fff,0xe8057000-0xe8057fff,0xe8059000-0xe8059fff,0xe805b000-0xe805bfff,0xe805d000-0xe805dfff irq 61,62,63,64,65,66 on simplebus0 gpioc0: on gpio0 gpiobus0: on gpio0 ehci0: mem 0xd4ea3c00-0xd4ea3cff,0xd4ea4000-0xd4ea46ff,0xd4ea5000-0xd4ea5fff irq 109 on simplebus0 ehci0: Starting TI EHCI USB Controller ehci0: UHH revision 0x50700100 ehci0: OMAP_UHH_SYSCONFIG: 0x00000014 ehci0: UHH setup done, uhh_hostconfig=0x8000001c ehci0: PHY reset operation timed out usbus0: EHCI version 1.0 usbus0 on ehci0 iichb0: mem 0xe8070000-0xe80700ff irq 88 on simplebus0 iichb0: I2C revision 4.0 iicbus0: on iichb0 iic0: on iicbus0 ti_sdma0: mem 0xd4ea6000-0xd4ea6fff irq 44,45,46,47 on simplebus0 ti_sdma0: sDMA revision 00010900 ti_mmchs0: mem 0xe809c000-0xe809cfff irq 115 on simplebus0 mmc0: on ti_mmchs0 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 mmcsd0: 3849MB at mmc0 25.0MHz/4bit/1-block Root mount waiting for: usbus0 Root mount waiting for: usbus0 uhub0: 3 ports with 3 removable, self powered Trying to mount root from ufs:mmcsd0s2 []... warning: no time-of-day clock registered, system time will not be set accurately Setting hostuuid: 85ba28b4-11fb-11e2-858f-b779e79d1ea7. Setting hostid: 0x884150e4. No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_pointsha256: /kernel: No such file or directory kickstart. Starting file system checks: /dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s2: clean, 782573 free (125 frags, 97806 blocks, 0.0% fragmentation) Mounting local file systems:. Writing entropy file:. Setting hostname: pandaboard. Starting Network: lo0. lo0: flags=8049 metric 0 mtu 16384 options=600003 inet 127.0.0.1 netmask 0xff000000 Generating host.conf. Creating and/or trimming log files. realpath: /dev/dumpdev: No such file or directory /etc/rc: WARNING: Dump device does not exist. Savecore not run. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Clearing /tmp (X related). Updating motd:. Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: 81:cf:62:a6:c4:fd:fe:6c:4e:d2:d2:9f:7b:a9:8a:fa root@pandaboard The key's randomart image is: +--[RSA1 1024]----+ | | | . | | . . | | . . o . | | o = S | | . + o o | | . + + . | | . *.. .o | | .oE+=.=+ | +-----------------+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: c5:7e:81:41:31:91:09:e8:61:ec:48:6e:af:8c:c4:a6 root@pandaboard The key's randomart image is: +--[ DSA 1024]----+ | . ..o*= | | . = .o+ | | o = . + . | | + o o . | | . . . S . . | | + . . | | + o . | |E . o | | | +-----------------+ Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: cb:41:a7:33:06:b3:b9:be:2c:c8:82:8a:16:3c:fe:d6 root@pandaboard The key's randomart image is: +--[ RSA 2048]----+ | | | | | o . . | | * o | |. o S | | + + = | |o.o.. . o | |+oo..E | |=.o. .+. | +-----------------+ Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 0a:87:ad:b0:d5:bf:13:18:6c:c8:23:0e:ef:82:59:85 root@pandaboard The key's randomart image is: +--[ECDSA 256]---+ | | | | | o o | |. E =++ | | +.o+o+oS | | ++ +.o. | |.+. . . .. | |+ . .. | | . .. | +-----------------+ Performing sanity check on sshd configuration. Starting sshd. Starting background file system checks in 60 seconds. Tue Oct 9 10:25:33 UTC 2012 FreeBSD/arm (pandaboard) (ttyu0) login: root FreeBSD 10.0-CURRENT (PANDABOARD-MMCSD) #0 r241336M: Tue Oct 9 01:19:51 ULAT 2012 Welcome to FreeBSD! Before seeking technical support, please use the following resources: o Security advisories and updated errata information for all releases are at http://www.FreeBSD.org/releases/ - always consult the ERRATA section for your release first as it's updated frequently. o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and, along with the mailing lists, can be searched by going to http://www.FreeBSD.org/search/. If the doc package has been installed (or fetched via pkg_add -r lang-freebsd-doc, where lang is the 2-letter language code, e.g. en), they are also available formatted in /usr/local/share/doc/freebsd. If you still have a question or problem, please take the output of `uname -a', along with any relevant error messages, and email it as a question to the questions@FreeBSD.org mailing list. If you are unfamiliar with FreeBSD's directory layout, please refer to the hier(7) manual page. If you are not familiar with manual pages, type `man man'. Edit /etc/motd to change this login announcement. root@pandaboard:/root # ifconfig lo0: flags=8049 metric 0 mtu 16384 options=600003 inet 127.0.0.1 netmask 0xff000000