Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0 r188305M: Sun Feb  8 19:38:33 ULAT 2009
    tsgan@beastie.micom.mng.net:/usr/obj/usr/src/sys/DEVIL_WITNESS
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz (2527.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
  Cores per package: 2
real memory  = 2089578496 (1992 MB)
avail memory = 2033082368 (1938 MB)
ACPI APIC Table: <LENOVO TP-7U   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-7U> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ef00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4400000-0xf47fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf4200000-0xf42fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x1840-0x185f mem 0xfc100000-0xfc11ffff,0xfc325000-0xfc325fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:25:9d:36:1d
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801I (ICH9) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801I (ICH9) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801I (ICH9) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc326c00-0xfc326fff irq 23 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
ugen0: <Chicony Electronics Co., Ltd. Integrated Camera, class 239/2, rev 2.00/3.20, addr 2> on uhub3
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xfc320000-0xfc323fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090131_0127
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pci4: <memory> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801I (ICH9) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801I (ICH9) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <Intel 82801I (ICH9) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc327000-0xfc3273ff irq 19 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf4800000-0xf4800fff irq 16 at device 0.0 on pci21
cbb0: Found memory at f4800000
cbb0: Secondary bus is 22
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem 0xf4801000-0xf48017ff irq 17 at device 0.1 on pci21
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:a0:09:5d
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S100, max_rec 128 bytes.
fwohci0: max_rec 128 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:01:6c:a0:09:5d
fwe0: Ethernet address: 02:01:6c:a0:09:5d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:01:6c:20:00:a0:09:5d @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xb28220
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci21: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci21: <base peripheral> at device 0.3 (no driver attached)
pci21: <base peripheral> at device 0.4 (no driver attached)
pci21: <base peripheral> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel AHCI controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xfc326000-0xfc3267ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.20 controller with 4 ports PM not supported
ata4: <ATA channel 0> on atapci1
ata4: executing CLO failed
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: executing CLO failed
ata5: [ITHREAD]
ata6: <ATA channel 2> on atapci1
ata6: port not implemented
ata6: [ITHREAD]
ata7: <ATA channel 3> on atapci1
ata7: port not implemented
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0x8549fb40 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._OSC] (Node 0x852b28c0), AE_AML_INTERNAL
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0x8549e0c0 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0x852b27e0), AE_AML_INTERNAL
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: cannot reserve I/O port range
ugen1: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 2.00/17.03, addr 2> on uhub1
ugen2: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II, class 224/1, rev 2.00/3.99, addr 3> on uhub1
Timecounter "TSC" frequency 2527014592 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
Status is 0x30000006
ad8: 305245MB <WDC WD3200BEVS-08VAT1 13.01A13> at ata4-master SATA150
acd0: DVDR <MATSHITADVD-RAM UJ862A/SB04> at ata5-master SATA150
hdac0: HDA Codec #0: Conexant CX20561 (Hermosa)
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 0 nid 1 on hdac0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata5:0:0:0): CAM Status: SCSI Status Error
(probe0:ata5:0:0:0): SCSI Status: Check Condition
(probe0:ata5:0:0:0): NOT READY asc:3a,1
(probe0:ata5:0:0:0): Medium not present - tray closed
(probe0:ata5:0:0:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata5:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata5:0:0:0): CAM Status: SCSI Status Error
(probe0:ata5:0:0:0): SCSI Status: Check Condition
(probe0:ata5:0:0:0): NOT READY asc:3a,1
(probe0:ata5:0:0:0): Medium not present - tray closed
(probe0:ata5:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ata5 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ862A SB04> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad8s1a
lock order reversal:
 1st 0x85176044 user map (user map) @ /usr/src/sys/vm/vm_map.c:3198
 2nd 0x8557cad0 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2092
KDB: stack backtrace:
db_trace_self_wrapper(80a196d4,84de090c,8074b065,4,80a14cce,...) at db_trace_self_wrapper+0x26
kdb_backtrace(4,80a14cce,85110728,85115ba8,84de0968,...) at kdb_backtrace+0x29
_witness_debugger(80a1c3f9,8557cad0,80a0fd02,85115ba8,80a23137,...) at _witness_debugger+0x25
witness_checkorder(8557cad0,1,80a23137,82c,0,...) at witness_checkorder+0x839
__lockmgr_args(8557cad0,200501,8557caec,0,0,...) at __lockmgr_args+0x237
ffs_lock(84de0a78,8074ae0b,80a3f42e,200501,8557ca78,...) at ffs_lock+0x8a
VOP_LOCK1_APV(80b09920,84de0a78,85172e24,80b20980,8557ca78,...) at VOP_LOCK1_APV+0xb5
_vn_lock(8557ca78,200501,80a23137,82c,4,...) at _vn_lock+0x5e
vget(8557ca78,200501,85172d80,4b4,0,...) at vget+0xc9
vnode_pager_lock(8146cd14,0,80a3ca0b,127,84de0c18,...) at vnode_pager_lock+0x1e0
vm_fault(85176000,80db000,2,8,80db820,...) at vm_fault+0x1df
trap_pfault(5,0,80a4abff,2e7,85172d80,...) at trap_pfault+0xf4
trap(84de0d38) at trap+0x289
calltrap() at calltrap+0x6
--- trap 0xc, eip = 0x80480e5, esp = 0x7fbfeef0, ebp = 0x7fbfef10 ---
cryptosoft0: <software crypto> on motherboard
GEOM_ELI: Device ad8s1f.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 13
ZFS storage pool version 13
bridge0: Ethernet address: 56:cf:d5:a4:e8:a9
tap0: Ethernet address: 00:bd:01:36:00:00
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
em0: link state changed to UP