~> sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=7):
     74 61 70 70 65 74 6f                              tappeto         
scan_ssid=1 (0x1)
BSSID - hexdump(len=6): 00 1a 70 47 cc 5c
proto: 0x3
key_mgmt: 0x2
pairwise: 0x10
PSK - hexdump(len=32): [REMOVED]
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=6):
     70 75 62 6c 69 63                                 public          
key_mgmt: 0x4
Line: 20 - start of a new network block
ssid - hexdump_ascii(len=3):
     6e 74 6d                                          ntm             
key_mgmt: 0x4
wep_tx_keyidx=0 (0x0)
wep_key0 - hexdump(len=13): [REMOVED]
Line: 27 - start of a new network block
ssid - hexdump_ascii(len=6):
     4d 4f 42 49 4c 45                                 MOBILE          
key_mgmt: 0x4
Priority group 0
   id=0 ssid='tappeto'
   id=1 ssid='public'
   id=2 ssid='ntm'
   id=3 ssid='MOBILE'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:18:de:12:04:fd
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     74 61 70 70 65 74 6f                              tappeto         
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
ioctl[SIOCS80211, op 103, len 128]: Device not configured
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0