GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA1 #6: Tue Jul  7 22:57:23 UTC 2009
    root@atari.bfh.ch:/usr/obj/usr/src/sys/ATARI
real memory  = 2147483648 (2048 MB)
avail memory = 2081284096 (1984 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (450.03 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (450.03 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
ispfw: registered firmware <isp_1000>
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> mem 0x1fe00004000-0x1fe00005fff,0x1fe01000000-0x1fe010000ff,0x1fe00000000-0x1fe0000cfff irq 2033,2030,2031,2021,2024,2034 on nexus0
pcib0: Psycho, impl 0, version 4, IGN 0x1f, bus B, 33MHz
initializing counter-timer
Timecounter "pcib0" frequency 1000000 Hz quality 100
pcib0: DVMA map: 0xfc000000 to 0xffffffff, streaming buffer
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [GIANT-LOCKED]
pcib0: [ITHREAD]
pcib0: [GIANT-LOCKED]
pcib0: [ITHREAD]
pcib0: [FILTER]
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
scc0: [FILTER]
uart0: <SAB 82532 v3.2, channel A> on scc0
uart0: [FILTER]
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on scc0
uart1: [FILTER]
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: [FILTER]
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
uart3: [FILTER]
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:c8:cc:73
hme0: [ITHREAD]
sym0: <875> port 0x400-0x4ff mem 0x10000-0x100ff,0x12000-0x12fff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [ITHREAD]
sym1: <875> port 0x800-0x8ff mem 0x14000-0x140ff,0x16000-0x16fff at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: [ITHREAD]
pcib1: <U2P UPA-PCI bridge> mem 0x1fe00002000-0x1fe00003fff,0x1fe01800000-0x1fe018000ff,0x1fe00000000-0x1fe0000cfff irq 2032,2030,2031,2021,2024,2034 on nexus0
pcib1: Psycho, impl 0, version 4, IGN 0x1f, bus A, 66MHz
pcib1: [FILTER]
pci1: <OFW PCI bus> on pcib1
nexus0: <syscons> type unknown (no driver attached)
Timecounter "tick" frequency 450030984 Hz quality 10
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: cd present [1157088 x 512 byte records]
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3364M SUN36G 0804> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
da0: Command Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 1 lun 0
da1: <FUJITSU MAJ3364M SUN36G 0804> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
da1: Command Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
SMP: AP CPU #1 Launched!
(cd0:sym0:0:6:0): READ(10). CDB: 28 0 0 11 a7 df 0 0 1 0 
(cd0:sym0:0:6:0): CAM Status: SCSI Status Error
(cd0:sym0:0:6:0): SCSI Status: Check Condition
(cd0:sym0:0:6:0): ILLEGAL REQUEST asc:64,0
(cd0:sym0:0:6:0): Illegal mode for this track
(cd0:sym0:0:6:0): Unretryable error
(cd0:sym0:0:6:0): cddone: got error 0x6 back
GEOM: cd0: invalid VTOC8 label.
GEOM: da0: adding VTOC8 information.
GEOM: da1: adding VTOC8 information.
GEOM: iso9660/FreeBSD_Install: invalid VTOC8 label.
Trying to mount root from ufs:/dev/da0a